Weldsale Company, LLC is proud to present our new products for 2008.

WS214

Price: $128.00 each

This 90 degree magnet clamp has 150 lbs. of holding force on each face. On and off switches make for easy setup and removal of the magnet. The faces of the magnet work on plate surfaces and are curved to work on pipe.

WS215

Price: $128.00 each

With the WS215 you can set any angle between 15 and 270 degrees. It has an on/off switch that makes setup and removal easy. There is a level on the bottom of the arm for aligning with the true horizontal plane. One side of the magnet is flat for working on plate surfaces, the reverse side has a V notch in it for the pipe.

WS16–134LR

Price: $172.00 each

9" Vertical Clamp
Arm slids up and down rail. With one fast turn of the screw, the part is clamped. All the time turning the screw on the convential arm clamps is saved. Bases are knurled and hardened to bind in the platen hold.
Clamping Envelope: 0" to 9"
Throat: 7-3/4"
Available in 1-3/4 square hole size only"

WS16–134-20LR

Price: $203.00 each

20" Vertical Clamp
This clamp is identical to our WS16-134LR shown above, except that is has a larger clamping envelop of 0 to 20".
Throat: 7-3/4
"Available in 1-3/4 square hole size only"

WSCUBE668

Price: $390.00 each

Dimensions: 6” wide x 8” deep x 6” high

Advantages of the WSCUBE668

• WSCUBE668- Cubes can be stacked on 8” side to form a 16” or 24” surface on the platen. Thus locating and positioning can be done above the platen.
• The WSCUBE668 with its highly machined surface can be bolted down 90 degrees perpendicular to each other to create a 90 degree corner.
• Modular Weldsale Elevation blocks allow for quick action set up and knock down for the next application.
• Weldsale WSCUBE668 can fit any Weldsale platen or acorn style table.( Please specify if square hole size is different from 1-3/4’’).
• WSCUBE668 and other Weldsale Elevation blocks are made to be used together(See page 9 of the catalog).

WSTOWER12B

Price: $199.00 each

Dimensions: 12” high x 4” wide x 6” deep

Advantages of the WSTOWER12B

• All outside surfaces are machined square and perpendicular to provide a machined surface for fixturing your weldment.
• The Weldsale WSTOWER12B has 1-3/4” square holes with a cast in socket for use with Weldsale flextooling.
• The slots allow the WSTOWER12B to be bolted to your platen or another Weldsale Elevation block at the desired location.
• WSTOWER12B can be combined with WSKNEE1012, WS12CUBE, WSTOMB12 & WSCUBE668 for added height. The slots & holes allow these blocks to be bolted to one another.
• The WSTOWER12B has excellent appeal to welders. It provides a right angle that the weldment can be clamped against and the square hole on top gives greater elevation to your clamps.
• They provide double duty as machined 90 degree angles. As well as an elevated surface for your clamps so you gain a higher clamping envelope.